Meet the Navis F280 ARGB and say sayonara to hot flashes in your CPU.

This is a portable air-conditioning liquid cooling system with a silent ceramic-bearing block pump and PWM control. We've paired it with a cooler with two illuminated (!) Fluctus 140 PWM ARGB fans (!!), so be sure to put on a warm beanie before starting your PC. We're serious – our meteorologists have warned us against gale force winds.

Navis F280 ARGB
Turn on some epic music before you read on, because we're about to introduce you to one of our favorite liquid cooling systems. Meet the Navis F280 ARGB!

This illuminated bad boy can handle even the high-power processors – that's because it works with a quiet ceramic-bearing heart block pump with PWM speed control. The package also includes two Fluctus fans. Each is 140 mm in size and can run efficiently even at lower speeds, so tell your besties that you'll be tied to your PC for a long time.

And the cherry on top – the Navis F280 ARGB is compatible with all popular sockets, so you'll assemble it on almost any CPU. You're welcome ;)

Dark Frosty knight
Sometimes we find ourselves saying that Navis F280 ARGB is our dark frosty knight that perfectly cools the CPU even when you're squeezing the last juice out of your PC. We once even made a mini-armor for it, but it was uncomfortable to assemble.

Instead, we’ve built an asymmetric water block that absorbs heat from the processor. We combined it with a ceramic bearing pump controlled by a PWM signal. That means that the pump adjusts its speed (between 1600 and 2600 RPM) together with the speed of the fans – so you can finally work in silence.
Coolant in Navis F280 ARGB passes through a 280 mm class radiator, designed specifically with our greatest pride – the Fluctus fans – in mind. Your friends won’t pass by a combo like that without experiencing pangs of jealousy.

Can you give me some light?
Hardware without ARGB is fine – but the truth is, it's nice to be surrounded with a colorful aurora over your desk. That's why the Fluctus 140 PWM fans with the ARGB option are mounted on the radiator. We’ve also illuminated the edge of the block-pump and the ENDORFY logo - YOLO. With ARGB, you can customize the look of the cooler to suit your world management center. You’ll illuminate it in any color you like or set your own effect, e.g., a shimmering rainbow or a pulsating wave. The Navis F280 ARGB
works just as well as its non-illuminated brother. The coolers have the same excellent design - we didn't want to sacrifice performance for a funky look.

Have fun!
Navis F280 ARGB illuminates even if you don't have a compatible motherboard or a PC case with the controller. That’s because we give you a Nano-Reset ARGB controller with which you’ll set yourself one of the pre-programmed illumination effects. Have fun!

Just the way you like it
When – just like us – you spend half your life at the computer, you know how important it is to keep your PC case tidy. And that's why we've made sure that the Navis F280 ARGB can be mounted in any position inside your computer. Just the way you like it.

This is thanks to the flexible hoses, each approximately 39 cm long, so that you can easily mount the cooler as you wish.

Non-creepy pasta paste
With the Navis F280 ARGB, you get a tube of efficient and easy-to-apply Pactum PT-3 thermal paste, which will have you covered for several installations. You have nothing to fear.

Performance
Suitable location: Computer case
Type: All-in-one liquid cooler
Fan diameter: 14 cm
Supported processor sockets: LGA 1155 (Socket H2), LGA 1200 (Socket H5), LGA 1700, LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM4, Socket AM5
Rotational speed (min): 250 RPM
Rotational speed (max): 1800 RPM
Pulse-width modulation (PWM) support: Yes
Bearing type: Fluid Dynamic Bearing (FDB)
Pump connector: SATA
Quantity per pack: 1 pc(s)
Pump motor speed (min): 1600 RPM
Pump motor speed (max): 2600 RPM
Mean time between failures (MTBF): 100000 h
Design
Product colour: Black
Radiator material: Aluminum
Base plate material: Copper
Number of fans: 2 fan(s)
Illumination LED: Yes
Illumination colour: Multi
LED connector type: 3-pin
Fan connector: 4-pin
Power
LED voltage: 5 V
Pump voltage: 12 V
Pump current: 0.33 mA
Fan voltage: 12 V
Fan current: 0.4 A
Weight & dimensions
Width: 140 mm
Depth: 310 mm
Height: 54 mm
Weight: 1.31 kg
Fan dimensions (W x D x H): 140 x 140 x 25 mm
Fan 2 dimensions (W x D x H): 140 x 140 x 25 mm
Package width: 410 mm
Package depth: 175 mm
Package height: 170 mm
Package weight: 1.95 kg
Packaging content
Mounting kit: Yes
RGB controller included: Yes
Installation instruction: Yes